1. INSPECT PROPELLER SHAFT ASSEMBLY

(a) Using a dial indicator, check the propeller shaft runout. Maximum runout: 1.02 mm (0.0402 in.) If the shaft runout is greater than the maximum, replace the shaft.

2. INSPECT UNIVERSAL J0INT SPIDER BEARING

(a) Mount the propeller shaft in a vise.

(b) Inspect the spider bearing for wear or damage.

(c) Using a dial indicator, measure the spider bearing axial play by turning the yoke of the flange while holding the shaft tightly.

Maximum bearing axial play:

0.05 mm (0.00197 in.)

If the spider bearing axial play exceeds the maximum, replace the spider bearing.